ElecGear Hall Joystick Kit Replacement for PS4 Controller, 2X Hall Effect Control Stick + 2X Calibration PCB + Desoldering Repair Tools for Analog Stick Thumbsticks – HL-PS4

Price: $34.93
(as of Jun 03, 2025 06:52:18 UTC – Details)

Model: HL-PS4
Hall Effect Joysticks Replacement for PlayStation 4 Wireless Controller
Calibration PCB with MCU for the finest Centering and Rocking Curve
A Copper Heating Plate and Solder Wick help a lot for the Desoldering

Reminders:
1. 🔺Works with DualShock PS4 controller (DS4) with main board JDM-001, 011, 020, 030, 040, 050 and 055
2. 🔺When calibrating, wait at least 3 seconds after unplugged the USB cable before you plug it in again to re-power on the DS4 controller
3. Make sure your controller is authentic and genuine
4. Not fully tested with some customized PS4 controllers based on DS4 like SCUF and other 3rd. The added back button board might be removed before settings
5. The operation takes serious soldering skill and devices. The soldering iron must be more than 60W
6. Seriously follow the steps we presented on the guide for this kit is novel and tricky
7. Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however NOT included

What’s in the box:
2x Hall Joysticks
2x Calibration PCB
1x Heating Plate
1x Solder Wick

Parcel Dimensions ‏ : ‎ 7.49 x 7.01 x 1.9 cm; 41 g
Manufacturer ‏ : ‎ ElecGear
Place of Business ‏ : ‎ 长新路49号3103室 宁波市 余姚市 315400 浙江省 CN
ASIN ‏ : ‎ B0CYBRZ2YP
Item model number ‏ : ‎ HL-PS4
Country of origin ‏ : ‎ China

[2x Hall Effect Joysticks for PS4] – Hall thumbsticks Replacement for PS4 controller (DS4). With the electromagnetic hallstick sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. Made from durable material with excellent rocking structure, it provides smoother movement and longer lifespan
[2x Added-on Calibration PCB] – The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. The calibrated signal outputs to the main board of controller. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming
[Desoldering Tools included] – A copper heating plate melts all the solder joints simultaneously simply with a soldering iron. Solder Wick, Holes Cleaner and simple PCB holder included. With as many as 14 prongs, removing the old problem stick is the most difficult task. It might is not suitable for newbies, though we added these helping hand in the kit
[Compatibility and Reminder] – 1. Please carefully study the images for compatible controller. 2. The soldering iron must be more than 60W. And the operation takes serious soldering skill and devices to desolder the old stick off the PCB. 3. Seriously follow the steps we presented on the installation guide for this kit is novel and tricky. 4. 🔺Attention: When calibrating, wait at least 3 seconds after unplugged the USB cable before you plug it in again to re-power on the DS4 controller
[What’s in box Model: HL-PS4] – 2x Hall Joysticks, 2x Calibration PCB, 1x Heating Plate, 1x Solder Wick. (🔺Teardown screwdriver tools, USB input cables and wired/wireless controllers, other soldering tools and materials are required, however NOT included.)